Sale!
Larger Photo

Rheem Heat Pump 3.5 Ton

List Price: $4,800.00
Our Price: $3,054.00You save $1746.00!

-

or
Add to Wishlist Add to Wishlist
Add to Wishlist

Description

Rheem Heat Pump 3.5 Ton

Rheem – RP1442FJ1NA – Classic® Series 3.5 Ton, 14 SEER Single-Stage Heat Pump, 208-230/1/60

Description
R-410A HFC refrigerant.
Complete factory charged, wired, and run tested.
Scroll compressors with internal line break overload and high-pressure protection.
The single-stage compressor on all models.
Convertible airflow.
TXV refrigerant metering system.
High Pressure and Low Pressure/Loss of charge protection standard on all models.
Solid Core liquid line filter drier.
Single slab evaporator coil facilitates easy cleaning for maintained high efficiencies.
Cooling operation up to 125 degrees F ambient.
Easily removable filter, blower, gas heat, and compressor/control access panels permit prompt service.
Powder Paint Finish meets ASTMB117 steel coated on each side for maximum protection.
G90 galvanized.
The one-piece top cover and one-piece base pan with drawn supply and return opening for superior water management.
Externally mounted refrigerant gauge ports for easy service diagnostics.
Easy to install plug-in; slip in, 100% fully modulating economizer. 82% of steady-state efficiency.
Forkable base rails for easy handling and lifting.
Single point electrical and gas connections.
A high-performance belt drives the motor with variable pitch pulleys and a quick-adjust belt system.
Permanently lubricated evaporator, condenser, and gas heat inducer motors.
Condenser motor is internally protected, totally enclosed with shaft down design.
2-inch filter standard with slide-out design.
Single-stage gas valve, direct spark ignition, and induced draft for efficiency and reliability.
Tubular heat exchange for long life and induced draft for efficiency and reliability.
Solid-state furnace control with onboard diagnostics.
Colored and labeled wiring. Micro-Channel coils.
Molded compressor plug.

Micro Channel evaporators and condensers deliver superior performance with less refrigerant charge and less weight than conventional copper tube/aluminum fin coils. In addition, the aluminum design has superior formicary corrosion protection and less potential for leaks due to the elimination of tube rubbing potential. Its easier to clean and has a more robust surface.

Features and Specification

Length 33.750000
Number of Fan Blades 1
Liquid Line Fitting Sweat or Braze
ETL Listed No
Fins per Inch 20
Full Load Amps 1
Heating Capacity 25600, 25600-40000
Height 27.000000
HSPF 8.5
Inverter No
Phase Single
Warranty Offered Yes
Suction Line Fitting Sweat or Braze
Tier Classic
Tonnage 3.5
UL Listed Yes
UOM EA
UPC 662021406980
Voltage 208-230 VAC
Width 33.750000
Stages Cool 1
Liquid Line Size (OD) 3/8″
Suction Line Size (OD) 7/8″
Equipment Type Heat Pump
Refrigerant R-410a
Package Height 35.000000
Package Length 36.380000
Package Weight 221.000000
Package Width 36.380000
Product Family RP14
Sound Level (dBA) 74.1
Stage Single
Energy Star Rated Yes
Weight 221.000000
EER 12
CFM 3815
Compressor Scroll
Condenser Motor RPM 825
Condenser Motor Type Direct Drive
Cooling Capacity 42500
Cubic Measurement 17.797900
Dimensional Weight 327.000000
EAN 0662021406980
Brand Rheem

Your warranty

rheem_rp1442fj1na_article_1458289908676_en_war

Rheem – RH1P4221STANJA – 3 -1/2 Ton, R-410A, 1 Stage, Aluminum Air Handler, PSC Motor, 208-230/1/60

Description

Please Note! This model is now AHRI rated with the 13PJL Series heat pump. No other pre 2015 platform heat pumps will be listed with aluminum indoor products!

RH1P- Series, PSC Motor, Efficiencies up to 15 SEER:
Versatile 4-way convertible design for Upflow, Downflow, horizontal left and horizontal right applications.
Factory-installed indoor coil.
Sturdy cabinet construction with 1.0 inch [25.4 mm] of foil faced insulation for excellent sound and insulating characteristics.
Field-installed auxiliary electric heater kits (not included) provide exact heat for indoor comfort. Kits include circuit breakers which meet U.L. and cUL requirements for service disconnect.
1-1/2 Ton [5.3 KW] through 5 ton [17.6 KW] models are between 42 1/2 to 55 1/2 inches [1080 to 1410 mm] tall and 22 inches [559 mm] deep.
All models meet or exceed 330 to 400 CFM [156 to 189 L/s] per ton at .3 inches [.7 kPa] of external static pressure.
Enhanced airflow up to .7″ external static pressure.
Evaporator is constructed of aluminum fins bonded to internally grooved aluminum tubing.

Features and Specification

Liquid Line Fitting Sweat or Braze
Metering Device TXV/TEV – Thermostatic Expansion Valve
Motor Type PSC
Length 21.687500
Fins per Inch Not Provided
Energy Star Rated No
Equipment Type Electric Heat / Cool
ETL Listed No
Filter Size 20″ x 20
Heating Capacity 42000
Height 50.500000
Includes Filter Rack No
Phase Single
Suction Line Size (OD) 7/8″
UOM EA
Suction Line Fitting Sweat or Braze
Tier Standard Efficiency
Tonnage 3.5
UL Listed Yes
UL Recognized No
UPC 662021359262
Voltage 208-240 VAC
Warranty Offered Yes
Width 21.000000
Liquid Line Size (OD) 3/8″
Electric Heat Range [kW] 3.6, 3.6-24
Package Length 25.310000
Package Weight 166.000000
Package Width 24.000000
Product Family RH1P
Refrigerant R-410a
RPM 1075
Sound Level (dBA) 0
Stage Single
Package Height 50.750000
EAN 0662021359262
Weight 130.000000
Blower Motor Speeds 2 (Two)
Blower Motor Type PSC (Permanent Split Capacitor)
Blower Wheel 10″ x 10″
Brand Rheem
CFM 1050, 1050-1400
CFM Cooling 1260, 1260-1600
CFM Heating 1260, 1260-1600
Blower Motor HP 1/2 HP
Cooling Capacity 42000
Cubic Measurement 13.310000
Dimensional Weight 221.000000
Drain Connection Size 3/4″
Blower Motor RPM 1075
Air Flow Convertible
See this special offer before anything else
RunTru Air Conditioner by Trane
Our System is secure and 100% save
We accept the main credit cards through Paypal and we also have Affirm instant financial available.
Our Inventory